NaturallySpeaking unable to detect headset

In this blog you will learn about Dragon NaturallySpeaking unable to detect headset. We know Dragon Naturally Speaking program required a microphone to dictate. And choosing a right headset with microphone is important as well. Not all headset with microphone are supported by Dragon Naturally speaking program, and also sometime even when we have right headset Dragon Naturally Speaking doesn’t detect the headset plug it. So, we discuss how to fix this problem and get the Dragon working on our system.

For selecting the right headset which is compatible for you Dragon Naturally Speaking program is check the headset list which is certified by Nuance on Nuance website that is www.nuance.com.

Type of headset that you can use to fix Dragon NaturallySpeaking unable to detect headset

  • USB Type
  • 5 jack
  • Wireless Headset (Bluetooth)

USB headsets are regard as best for Dragon Naturally Speaking program because of its easy installation. Just plug n play works with USB headset so many users find USB headset as easy with Dragon Naturally Speaking.

3.5 jack headsets are old now and sometimes we need proper Audio Driver to setup the headset on new generation computer with new operating system.

Wireless headsets are also good connectivity mode for Dragon and very easy to setup to our computer with Bluetooth, just need to turn on the Bluetooth on both device computer and the headset.

Common issue found while setting up Headset

Most common issue we come across while setting up headset with your Dragon program  

1. Unable to detect the headset.

2. Headset detect by computer but not showing on Dragon Naturally Speaking device list.

How to resolve it

Find out if your Headset USB is properly plugin on the computer USB port.

Check if your Bluetooth is turn on or off on both headset and computer.

 

See if your microphone 3.5 jack is properly plugin on the right Audio port.

Also check your headset whether it’s compatible for Dragon Naturally Speaking program

Check if your headset driver is installed properly on your computer if driver required for it.

Sometimes the computer don’t detect the headset even after driver is installed in this case we need a restart of the computer after the driver is installed.

 

These are some troubleshooting steps that you can use to fix this issue. Or you can call our number 1-855-848-0799 , We are Dragon Support Expert.

Dragon NaturallySpeaking 13 UI not appear on screen on windows 10

In this blog, you will learn Dragon NaturallySpeaking 13 UI display issue. Some people face problem using Dragon NaturallySpeaking 13  on windows 10. When try to launch the program it doesn’t come up on screen.And when we check on Task Manager  the services of Dragon Naturally Speaking is running there. So on the screen there is no Dragon Naturally Speaking 13. This is what we are going to learn to fix in this blog.

 

Things you can try to fix Dragon NaturallySpeaking 13 UI issue

1 – Make sure the Dragon Naturally Speaking 13 version is up-to-date. Please update your windows 10 as well.

2 – Turn off Compatibility Mode. With the latest version of windows 10 Dragon Naturally Speaking 13 does not need Compatibility Mode on.

To turn off Compatibility Mode locate the Dragon Naturally Speaking shortcut and right click on it.

Select Properties from the menu and navigate to compatibility tab and look for Run in compatibility mode. We must unchecked it.

If the above troubleshoot steps doesn’t help then we can try some other steps to resolve this issue.

3 – Let’s not run natspeak.exe as Administrator.

Locate natspeak.exe on the computer it should be on the directory. This directory is where your Dragon Naturally Speaking is installed. Once we got natspeak.exe right click on it and select properties. Click on Compatibility Tab and uncheck Run as Administrator. Then click on apply and ok on the bottom.

Restart the computer and try running Dragon Naturally Speaking 13 again.

If the above steps do not help, then you can try one more step to fix it.

4 – Sometime we face issue using headphone with 3.5 jack along with microphone jack on Dragon Naturally Speaking on Windows 10. So you can give a try with the USB headphones with microphone which is certified by Nuance to use on Dragon Naturally Speaking .

 

Above troubleshooting steps is to fix Dragon Naturally Speaking 13 UI issue with Windows 10. If you are not able to fix after performing above steps then call dragon support number.

Transcribing Audio file in Dragon Naturally Speaking

In this Blog you will learn about Audio file in Dragon Naturally Speaking. Dragon Naturally Speaking has inbuilt feature to transcribe audio file .  It is very helpful for people who work on big office firms. Also Very helpful if you record a speech and want to get the speech as a text again.

How to use Transcription in Dragon Naturally Speaking

  • Click on the dragon icon from the menu.
  • Then select the option Switch to Transcription Mode

Now you will the see the status change to Audio file in Dragon Naturally Speaking:

Transcription feature also need a profile to work. If you already create a profile for Transcription than it’s fine. If not then you will need to create a profile to use it.

Now choose the Transcription source from the list that bring up on the screen. If not then click on Manage profiles and Audio source to add new transcription file.

To add new audio file for transcription just you need to drag the file onto the Drop file icon there. Also you can click on browse file to add file from folder where your files are save.

Dragon Naturally Speaking can transcribe audio which is in mp3,mp4,wav,aif,aiff,m4v, and m4a format.

Once you select the file your Dragon will start the transcribe process , It may take a while to complete the process it depend on the file size .

Once the transcription process is complete , the file will be save on your computer .

By default the transcribe files are save in Document/Dragon/Transcribed files, Also you can  select a different folder to save  the file on your computer.

The transcription files are save in format of Rich Text or Microsoft word. It can open by any application which support these file format.

It’s a very useful feature for many professional on their office work and also very useful for student as well.

I f you are facing any problem so you can call us our toll-free number +1-888-652-9580. And you can Visit our website Dragon support Experts.

Dragon Naturally Speaking 13 – Web Extension Feature

Here you will find a quick guide on the Limitations of Dragon Naturally Speaking 13 ’Web Extension Feature’. You’ve only got to read along and get to know the relevant information provided to you in this blog.

Limitations of Dragon Naturally Speaking 13’s Web Extension Feature

The Limitations of Dragon Naturally Speaking 13 Web Extension feature:

  • There are a few Dragon Web Extensions that are available in Web browsers and versions. Below is mentioned the list of the Web Browser;
  • Mozilla Firefox, 29 and later version
  • Google Chrome
  • Internet Explorer, 9, 10 and 11 version
  • Now in case you are not using any of the browsers mentioned above, you can still use the existing capabilities for commands and diction of Dragon as well. However, this would be without using the full-text control benefit.
  • You should know that the functions of Dragon differ from web browsers to web browsers. As an example; you cannot select Chrome, hyperlinks by name and commands such as the ‘Refresh page’ option cannot be used. So for using such actions, you are recommended to use the global commands like mouse commands or press commands on the keyboard.

The list of Limitations for Dragon Web Extensions on supported browsers:

  • Here you will find that the playback option is limited to the present dictation of the current field in Web applications such as Gmail and Hotmail. In relation to this, you will not be able to playback dictation for the previous fields if you move to another field. It doesn’t matter if you go back to the field even then will not have access to it.

The following method for opening the ‘correction’ menu while working in Web applications is not supported by Dragon at present.

They are mentioned below.

  • The Hotkey, this is the minus sign key
  • Then the double-click on the selected text
  • The Correction button available on the DragonBar Extras toolbar
  • The ‘Offline Mode’ is also not applicable for working with Web-based documents. And adding to that to play the back dictation you would have to use the voice commands like ‘Play that back’, ‘Read that,’ and ‘Read selection’. This is so as Dragon software doesn’t support the playback of dictation when the menus and buttons are used.
  • If you use the ‘Paste it here’ option for pasting copied text in a Rich Internet Application then the software will paste the last uttered words dictated. For example;
  • Try dictating “this is a test” then say “copy that”; now say “only a test” then “Paste it here”.  The utterance of “only a test” will be found pasted instead of the “this is a test”.
MORE STEPS BELOW –
  • This issue is so because the last utterance in a Rich Internet Application is always copied to the clipboard, despite a “copy” command is used or not.
  • The “Undo that” and “Undo last option” commands may not work continuously. This is because the Dictation Box may tend to display text not dictated. This error usually happens when the focus of the application is on a field that cannot be edited, and then you will do the following.
  • You will attempt to open the Dictation Box or
  • You may choose to speak into your microphone
  • This will you will prompt the Dictation Box to open automatically

You will also come across some Limitations of Dragon Web Extension that support specific to a selected supported browser.

Few such browsers mentioned below-
  • Microsoft Internet Explorer
  • Mozilla Firefox
  • Google Chrome

To know about the supported features for the above browsers you have the experts who can you can give a call to anytime and get the related information.

Conclusion:

Now we hope that in the above information we have provided all that you would like to know. As well as the information should be of great help to you for understanding the Limitations of Dragon Web Extension in an easier manner. However, if you have any confusion or some other queries then you can contact the team of experts at Dragon Naturally Speaking Customer Support. Therefore you will surely be assisted with the appropriate guidance and you will get the topmost answers to all your queries.

Incorrect dictation in Nuance Dragon – Fix!

Are you facing issues with Incorrect dictation in Nuance Dragon naturallyspeaking? You must frustrated right, as you are receiving incorrect results after dictating to Nuance Dragon software. You don’t have to worry about being here with us anymore . And we will definitely guide you with accurate resolutions that help you to get back on track with ease. You now have to follow the instructions below for the appropriate solutions and correct the wrong dictation results to solve the problems. .

Incorrect dictation in Nuance Dragon
Incorrect dictation in Nuance Dragon

Steps to fix the incorrect dictation in Nuance Dragon Results

  • The first thing you need to keep in mind whenever you dictate to Dragon you need to ensure that you. You are speaking clearly and using complete phrases and you are not pausing the words or skipping them and clipping the words at the end of the sentence.
  • When talking on the microphone you need to make sure that the consumer microphone is positioned correctly .
  • You can also test the microphone again by choosing the ‘ Audio ‘ button and then go to the ‘ Microphone ‘ option.
  • Then, after that you have to go to the “Options” tab, you need to click on the ‘ Miscellaneous ‘ option in the dialog box that opens up.
  • You now need to drag the ‘Speed vs. Accuracy slider towards the right side and then go to click on OK.

nuance dragon support:

We hope that the above method has been helpful and you are able to get over with the issue. But if not so and you still have a hard time then feel free to contact our team at Nuance Dragon Naturally Speaking Support number and share your related concerns with our executives in detail. You will surely have all the issues gone within a twinkle of an eye. So now without delaying you just need to go ahead and give us a dial on the number provided right, this moment and you will get to experience the topmost services of our staff here.

On the off chance that you are a client of Dragon Naturally Speaking Software and searching for any specialized help, with respect to your Dragon discourse acknowledgment programming or searching for mythical beast normally client support, if it’s not too much trouble don’t hesitate to call us on our helpline number, that is, +1-888-652-9580.

Incorrect results when dictating to dragon naturallySpeaking?

Are you facing a problem with the speaking results of Dragon Naturally Speaking? Is it so that every time you’re dictating the Dragon Naturally Speaking software is giving you incorrect results? Well, there is no need to be worried anymore now that you have reached our site and in this blog, you will definitely find all the solutions as well as the causes, why these issues occur. To get rid of the problem you would have to follow the given steps below.

To resolved Incorrect Results follow this step.

Incorrect Results, When Dictating To Dragon Naturally Speaking

We need to first make sure of few things. You are very clear, Complete phrase, No Pause, No skipping words and no repeating words.

Then you must also see that the microphone you’re using is positioned correctly. It is close to your mouth while speaking. You can try and run a microphone check. Go to choose “Audio and then Check Microphone”.


You now have to click on the Tools options. And in this options dialog box you will have to click on the ‘Miscellaneous’ tab. And then you need to Drag the ‘Speed vs. Accuracy’ slider more towards the right side. Now click on the OK button.


If you find that you are encountering the same issue continuously and still not able to get certain words correct then you got to make sure to use the ‘Correction Dialog Box so that the
Dragon Professional Individual learns about the errors. If you just choose the text and dictate it then Dragon Professional Individual will never come to know about the actual issue.


So now we hope that the above information was helpful and useful as well. But if not and you find the issue persisting then you must dial us right here on our toll-free number
+1-888-652-9580 right away and have the problem fixed up before it creates more problems. And you will surely be given the best services that are absolutely effective as the techs we have are highly experienced and are reliable to deliver a complete rectified solution.

Error; while unpacking program, Code 2 “Please report to author” when launching or installing Dragon

It is not that bad to face issues with software as now we have all the advanced tools that enable us to resolve all the issues that pop-up on a daily basis. And if you are experiencing problems with your Dragon Naturally Speaking Support then you should get it fixed immediately as delaying will only create bigger issues. And to guide you with the accurate solutions to successfully get rid of the issue, this blog is absolutely a total help. But for which you will need to read this blog carefully to have the appropriate results.

Now the steps for removing KB2533623 windows update are mentioned below- Dragon NaturallySpeaking Help

 Error; while unpacking program, Dragon Naturally Speaking Support
Dragon NaturallySpeaking help
  • First of all, you will need to go to the start menu and then move to the next step.
  • Then you just got to go for the control panel option.
  • After that, you are required to go to ‘programs and features’.
  • Now, you need to tap on the ‘View installed updates’ link which you can easily find at the left side of the window.
  • Next, you have to locate the updates of this window and then do choose the KB2533623 update.
  • You will now have to select the uninstall button.
  • After getting uninstalled from your device, then just go to restart your device.
  • Now you will have to make sure that you are able to install. And then launch the Nuance Dragon software desktop application on your system.

Now you are all set to get started with Nuance Dragon NaturallySpeaking help.

as you have successfully gone through the steps above. But if not so, then you will need to contact our experts here at Dragon Naturally Speaking Support. And you will surely be given assistance right away. No matter what time of the day you need our help we will be right there. And our team is capable to deliver relevant solutions within the least time possible.

As they are highly skilled and well-practiced to tackle any issues related. So you can without any hesitation contact our team now. Dragon Naturally Speaking Support is accessible for different issues on Dragon Naturally Speaking. one of the conspicuous issues is finding the Nuance Dragon Naturally Speaking Serial Number for enacting the Dragon Speech Recognition Software or Dragon Voice Recognition Software.

Error Invalid Acoustic in dragon and its fix.

Are you seeing error invalid acoustic in dragon naturallySpeaking? You should know that it is common to encounter issues when you upgrade your Nuance Dragon Naturally Speaking software from version 14 to 15. You will get this error when you try to upgrade dragon version 14 to version 15.

Why do we get this error?

You face this issue due to the older version of Nuance Dragon. Here the old profile had the diction source in it. Such as the Dragon Remote Microphone and this diction source does not support the version of Dragon 15 at all. So due to this, the unsupported acoustic inputs are skipped whenever you upgrade your profile. If in case you use the unsupported version of dragon 14 input methods. Then the configuration files in Dragon 15 will have this reference to the missing acoustic.

Follow the Steps below to fix Error Invalid Acoustic in dragon

So it is always best that you take the advice of our Dragon team experts.

Fix the Error ‘Invalid Acoustic’ When Upgrading Nuance Dragon 14 To 15
  • You need to go to the location of the upgraded profile and then give a right-click on the current folder.
  • Then you will have to click on the open tab to be able to check the acoustic.ini file.
  • You now will have to search the file for the acoustic codes that you can make use of.
  • Then you also need to check on the options.ini file that you will see in the same folder, then you got to open it to check for the ‘Last Used Acoustics’ keywords.
  • You have to remember that it has to be set to any of the value that is found in acoustic.ini file.
  • Lastly, you need to Edit, Save and then launch your Nuance Dragon Naturally Speaking software and you should be all done.

Now you should be all done and set with your upgraded Nuance Dragon. If you need any other related help or face issues then you have an efficient team at Nuance Dragon Technical Support you can dial us anytime on +1-888-652-9580. Here you will be provided with the most relevant methods that are absolutely satisfying. So you can rely on us and leave your concerns with our techs, they will see to it that all the issues related are resolved within the minimum time possible.

Steps to open the profile of Dragon Naturally Speaking on your device

Are you looking forward to Steps to open profile on Dragon Naturally Speaking Software on your system? Did not find the appropriate steps to do so? Now you will be able to do so for we are right there at your service to guide you with accurate solutions then you wouldn’t require going anywhere else. The only effort you will have to put in is you need to read this blog till the end and follow the given steps accordingly for better results.

steps to open profile

You need to first launch dragon naturally speaking on your device.

  • Then you are required to go to ‘manage users’ option.
  • After that, you have to choose the user file > advanced > restore.
  • Now, after doing so, a user name will get created.
  • Next, just close the manage users and move to dragon naturally speaking.
  • There you will see an option for ‘open users’. Just go there, and then you have to go for the restore user option.
  • Finally, you have to select the ‘open’ option and this is how you would able to open your profile.
  • But note that these steps are only for versions 7, 8, 9 and 10.
  • And in case if you are looking for some different versions or for restoring it manually, then you are supposed to give us a call so that we can guide you with that.

We just hope that steps to open profile we have given here are helpful. And reliable for you to get over with opening up the Dragon Naturally Speaking profile. As we have provided you with the exact solutions. But if not so and you find that you are still having a difficult time. Then you always have our expert right here a Dragon Naturally Speaking Customer Number. You can dial us any time without having any hesitation. And get to experience the top quality services that we render to our customers along with giving complete satisfaction in the results after resolved. So wouldn’t you like to avail such offers that are fast easy at hand whenever you require assistance? Yes, of course, who wouldn’t want, right?

Dragon program error # Error while unpacking program. Dragon Error 2. Reporting to the Author” error when launching or installing the Program

If you are facing terrible issues while unpacking the Dragon program error 2, then you must be feeling all frustrated not knowing what to do. But now that you are here, you will definitely get all your issues resolved with ease. You should know that launching or installing a Nuance product on a Windows Vista Operating System you will come across the error of Code 2 when you unpack the program, for which you must contact the supporting team.

dragon program error

The reason why this error is caused because Microsoft just released a new security update for the Windows Vista in the year July 2011, KB2533623, this is the caused issues with a few software and one of the problems is the launching and installing of some third party applications using Microsoft Windows Vista.

The issues are being looked into currently but till then we have another quick solution to help you get started with your Nuance application by removing the particular Microsoft update.

Here is the best solution for overcoming the said issue.

The First thing you’ve got to do is Remove the KB2533623 Windows Update & follow the below steps:

  • Then you need to go and choose the Start Control Panel Programs and then go to Features”.
  • Next, you need to go to choose the View installed updates” option link from the left side of the window.
  • After that, you will have to find the Update for Windows Vista for x64-based Systems (KB2533623)” update.
  • Then you will need to go and choose the KB2533623 update and “uninstall” the update.
  • Post the update has remove, restart the System/PC.
  • Finally, just post the systems restarts, Confirm that the Nuance Desktop application and it can now be installed.

We hope that the above steps were dependable and useful for dragon program error. Now that you have finished going through the process, in case you face any sort of issues then you must immediately contact our team at Dragon Naturally Speaking Support and you will be assisted right away. And be assured that you will be given relevant solutions within the least time possible as the techs here are efficient to tackle any Dragon Error face that are related and give effective results.